Reese brakeman digital manual

If the trailer brakes jerk or lockup adjust the Output Control down. Repeat this step until firm braking is felt with out jerking or lockup. Once the Output is set, drive forward and press the brake pedal, the tow vehicle and trailer should make a smooth stop. If the stop seems slow and more aggressive braking is desired, move the Sync Control rearward while holding the brake pedal. If the stop seems too aggressive adjust the Sync Control rearward while holding the brake pedal.

After making a Sync adjustment the Display will show the setting until the brake pedal is released. Make several stops at various speeds and adjust the Sync until stops are smooth and firm. Slight adjustment of the Output Control may also be desirable.

The Digital display shows the Output setting when the control is activated. It is used to setup and monitor the Brake Control and can be used when trouble shooting. Light pressure on the brake pedal will activate the trailer's brakes with no effect on the tow vehicle's brakes. This is useful for gradual slowing on steep grades or before stops. On some vehicles, operating the Brake Control's Manual. If the Brake Control is set aggressively pulsing may be felt in the trailer brakes.

Reese manuals. When calling have your receipt of purchase available to provide, along with serial on bottom side of brake control unit. This is typically a blue or white decal. Where to Buy. Add to Compare. Limited Lifetime Warranty. Test drive making several stops. Adjust the sync. Slight adjustment of the output control may also be desirable. Setting the brake control too aggressively could cause brake pulsing when towing with hazard flashers on.

If such settings are necessary, a pulse preventor can be used. Have someone watch the stoplights while the. Note: If any problems occur during set up refer to the Trouble shooting section of these instructions.

This is useful for gradual slowing on steep downhill grades or before stops. Note: A standard voltmeter will not show true output voltage.

Reese manuals. For the car. Text mode Original mode 1 2 3 4 5 6. SET UP 1.